产品 详情 大图
店铺首页>产品

NOISE/COM进口UFX7108 100Hz - 500MHz可编程噪声发生器

产品描述

品牌 NOISE/COM
型号 UFX7108
公司性质 私营企业
所在区域 广东深圳市
所在行业 其他电子元器件

  NOISE/COM进口UFX7108 100Hz - 500MHz可编程噪声发生器

  Noise UFX7108

  100 Hz - 500 MHz Programmable Multi-Purpose Noise Generator

  The NoiseCom UFX7000 Series Noise Generators represent the state of the art in noise generators. Utilizing dedicated keys and a 4x20 LCD display the UFX is both user friendly and powerful. They can be controlled manually by means of front panel controls, or, alternately, they can be controlled remotely by means of a controller via IEEE 488 (GPIB). These Instruments operate remotely only in the listen mode. The case is 17" wide, 5.25" high and 12.5" deep. It is equipped with front panel handles and fold down feet.

  The instrument's flexible architecture allows many options to be specified:

  Switched filter bank: Acts on noise and allows up to four filters to be connected. The filters can be specified in any bination of bandpass, lowpass, highpass, or notch. A thru line and set of terminations (RF loads) are also included. If no filters are specified, filter connections are supplied on the back panel. Available on signal side also. Output biner: Allows the user to inject a signal and add a controlled amount of noise. Signal attenuator: Available in 0.1 or 1 dB steps to 127 dB.

  The instruments allow the noise attenuator, noise filter, signal attenuator values, step size, and signal filter setting to be selected in three ways: at the front panel keypad, remotely via IEEE-488 bus, or automatically under program control.

  Every front panel operation except instrument on/ off is programmable. Programs are easily written using the program key, and information on the display guides the user through the next steps. Nine user- created programs that contain subroutines, delay times, and loops can be d in non-volatile memory.

点击展开

联系我们

店铺热门产品


产品分类

QQ交谈
拨打电话 立即联系